2019 Vermeer® Balers 605N

Selling Price -

$52,500.00

Net Only

Information

2019 Vermeer® Balers 605N

Like all Vermeer products, the new 605N Vermeer balers are built to last. With a sleek new design, these balers may look different, but what hasn’t changed is the high-performance and reliability they have to offer. Boasting durable, heavy-duty components and the ability to perform at a high capacity, the 605N Vermeer baler works hard to help you run smoothly and efficiently.


Approximately 12,500 bales
Flotation tires
Wide Pickup
*hours reading is bale count

Photos

Highlights

  • $52,500.00
  • Saskatoon
  • Pre-Owned
  • 000939
  • 2019
  • Vermeer®
  • Balers 605N
  • 1VRM1614K1009127
  • 12627
  • Available
  • 114 in | Bale: 61 in | (With Flotation Tires): 129 in | (With Standard Tires and Scale): 120 in | (With Flotation Tires and Scale): 115 in | of Belt: 6.8 in | (Tooth to Tooth): 77 in | (On Outside Flair): 90 in |
  • 117 in | With Inline Ramp: 129 in

Specifications

  • 2019
  • Vermeer®
  • Balers
  • 605N
  • General
  • 80 degree CV | Drive: Single 50, 60, 80
  • 14L-16.1
  • Horsepower Required: 80 hp | Horsepower Recommended: 100 hp
  • Drive Roller Size: 5.5 in. (14 cm) | Drum Roller Size: 12 in. (30.5 cm) with 1.8 in. (4.5 cm) hex bearings | Idler Roller Size: 3.5 in | Start Roller Size: 4.5 in | Stripper Band Diameter: 12.6 in
  • 114 in | Bale: 61 in | (With Flotation Tires): 129 in | (With Standard Tires and Scale): 120 in | (With Flotation Tires and Scale): 115 in | of Belt: 6.8 in | (Tooth to Tooth): 77 in | (On Outside Flair): 90 in |
  • 117 in | With Inline Ramp: 129 in
  • 166 in | (With Net): 195 in | (With Ramp): 195 in | of Belt - Long: 540 in | of Belt - Short: 533 in |
  • 72 in
  • (Fully Optioned): 8600 lbs | Drawbar: 1650 lbs
  • Type of Chamber: Variable | Number of Plys: 3-Ply mini rough top | Number of Belts: 8 | Type of Lace: Alligator Rivet | Torque Protection - Main Input Shaft: 540 rpm friction, 1000 rpm cutout | Torque Protection - Pick-up: Radial pin clutch or friction with slip sensing | Bearing and Sprocket Configuration: Hex shaft and bearings | Tooth Bars: 10 - 5 right, 5 left with double cam tracks | Number of Teeth: 55 Rubber mounted double tines with 3 1/16 in (7.8 cm) spacing | Floatation: Gauge wheels 7.10-16 HD semi-pneumatic with spring assist | Pickup Lift: Hydraulic pickup lift standard |
  • Roller: Single 50, 60, 80